Radio Controlled Clock; Manual Time Setting - Jvd Rb9391 Bedienungsanleitung

C2: Battery door
3. Getting Started:
Open battery door (C1)

Insert 2 pieces AAA size batteries observing polarity [" +" and " –" marks]

Replace battery compartment cover

The unit can be placed onto any flat surface; the unit is ready for use now.

4. Time and Alarm Setting

4.1 Radio Controlled Clock:

After batteries inserted, the clock automatically starts to scan the DCF time signal. Radio Control

Icon" " flashes on the LCD.
flashes，
Indicating now is receiving DCF
signal
The clock automatically scans the time signal at 3.00 a.m. every day to maintain accurate timing.

If reception fail, scanning stops ("
The clock can be set to scan the time signal manually by holding "RCC" button (B8) for 2 seconds.

Each reception takes about several minutes. If receptions fail, scanning stops.
Stop scanning by holding "RCC" button for 2 seconds.

" " shown on the LCD if it is in daylight saving time mode.


4.2 Manual Time Setting:

In time display mode, press "TIME SET

for 2 seconds to enter Clock/Calendar setting modes.
Press "+" or "-" button to adjust the setting and press "TIME SET

setting. By keeping the "+" or "-" button pressed, could speed up the setting.
The setting sequence is shown as follow: Time zone, 12/24 Hour, Hour, Minute, Second, Day of

Week Language, Year, Month/Date Sequence, Month, Date.
There are 10 languages are selectable for day of week: German, English, French, Italian, Dutch,

Spanish, Danish, Czech, Norwegian, Russian.
Note:
turns on,
Indicating signal received
successfully
" on LCD disappear)
" button to view the year. Hold "TIME SET
disappear,
Indicating signal reception
failed
" button
" button to confirm each
18