Herunterladen Diese Seite drucken

Acer X112H Schnellstartanleitung Seite 2

Werbung

Acer Project-QG_X1_New_31L.fm Page 2 Thursday, July 31, 2014 6:53 PM
English
Quick Start
 INSTALLATION
1. Power cord
2. VGA cable
3. VGA to component/HDTV adapter
4. 3 RCA component cable
5. Composite video cable
6. RS-232 cable
7. USB cable
8. HDMI cable
Note:
• Connector interface is subject to model's specifications.
• Long press to show the source menu. Change the active
source, short press the button to switch around.
 CONNECTORS
Connecting to a Source
1. Ensure the projector and your computer
are turned off.
2. Connect one end of the VGA cable to the
VGA connector on the projector; connect
the other end to the VGA connector on
the computer and tighten the screws.
3. Connect one end of the power cord into
the AC power socket on the projector;
connect the other end to an electrical
outlet.
Powering On the Projector
1. Turn on the projector first and then the
computer.
2. Adjust the position, focus and zoom.
3. Run your presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fan stops
running.
Bahasa Indonesia
Memulai Ringkas
 PEMASANGAN
1. Kabel daya
2. Kabel VGA
3. VGA ke komponen/adapter HDTV
4. Kabel komponen 3 RCA
5. Kabel video komposit
6. Kabel RS-232
7. Kabel USB
8. Kabel HDMI
Catatan:
• Interface konektor akan berbeda tergantung spesifikasi
model.
• Tekan terus untuk menampilkan menu sumber. Ubah
sumber aktif, tekan sebentar tombol untuk beralih.
 KONEKTOR
Menyambungkan ke komputer
1. Pastikan proyektor dan komputer dalam
keadaan mati.
2. Sambungkan satu ujung kabel VGA ke
konektor VGA di proyektor; sambungkan
ujung lainnya ke konektor VGA di
komputer dan kencangkan sekrupnya.
3. Sambungkan satu ujung kabel daya ke
dalam soket daya AC di proyektor;
sambungkan ujung lainnya ke
stopkontak listrik.
Menghidupkan proyektor
1. Hidupkan terlebih dulu proyektor baru
kemudian komputer.
2. Sesuaikan posisi, fokus, dan zoom.
3. Lakukan presentasi.
Mematikan proyektor
1. Tekan tombol daya dua kali.
2. Jangan lepaskan kabel daya AC dari
stopkontak sampai kipas proyektor
berhenti berjalan.

Werbung

loading