Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Remove the protection foil from the back of the LED strips and from the
plugs of the connection cables and the extension cables. Use little
pressure when sticking the items to the mounting surface.
Note:
The last element of each LED strip chain can be shortened, if desired. Use
a side cutter or similar to cut the element at the position that is marked
with the scissors symbol.
Finding the suitable Power Supply
Use one of the specified power supplies (not included) to operate the
LED strip(s). If you want to combine several LED strips, a power supply
with a higher power output is required in contrast to a single LED strip
configuration.
The power supplies feature an overload protection circuit. When
selecting the power supply ensure that the max. output power of the
power supply is higher than the overall power consumption of the LED
strip elements. If necessary, connect the LED strip elements to various
power supplies.
Power
Element 30 cm, 2.16 W Element 60 cm, 4.32 W Element 100 cm, 7.2 W
Supply
15 W
48 W
6 x
21 x
Using
3 x
10 x
10
2 x
6 x
Werbung
