Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
5.5 Establish potential equalisation
1.
Connect the unit to a potential equalisation system in accordance with the locally applicable
electrical standards. For this purpose, one of the two places marked with
5.6 Close the cover and connect the device to the mains
1.
Close the cover and tighten the cover screws.
Note the orientation of the cover. If the cover is mounted the wrong way around, the
Status-LED Receiver is no longer visible when the cover is closed.
2.
Insert the power plug in the AC wall outlet.
If the unit is supplied with power, the power indicator LED will light up green.
16 | EN
must be used.
Werbung
