Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
EN
Empty enclosure
EN
EN
EN
Control panel
EN
EN
Opening the enclosure cover
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Closing the enclosure cover
16
Ex d Enclosures made of Light
Metal, Flameproof Encapsulation
The operating position is optional.
For the operating position, please refer to the enclosed documentation.
1
2
1
2
• Loosen the threaded pin (2).
• Insert the key (1) into the hole
• Place the enclosure cover
3
05998E00
• To open the cover, move the
• Pull the handle upward and
• Loosen the threaded pin (2).
• Insert the key (1) into the hole
• Place the enclosure cover
3
15546E00
• Lubricate the thread with
• Attach the enclosure cover to
• Insert the spanner (1) into the
• Unscrew the enclosure cover by
14692E00
• Tighten the threaded pin (2).
(3) and unscrew the enclosure
cover.
carefully aside.
handle to the OFF position.
move it to the M position.
(3) and unscrew the enclosure
cover.
carefully aside.
OKS 403 grease.
the enclosure.
hole (3) and screw down the
enclosure cover evenly.
max. 90° so that the logo is at
the top of the enclosure.
143457 / 826560300010
2016-03-10·BA00·III·en·09
Werbung
