Kenwood KOS-L702 Bedienungsanleitung Seite 5

Switching Screen Mode
Press the [MODE] button.
Each time the button is pressed, the screen
mode switches as follows:
Display
"Full"
"Zoom"
"Just"
"Normal"
⁄
• Refer to <Monitor Setup> of the A/V controller's
manual.
• When you select the Menu, Easy Control screen,
or Navigation, the display is shown in the full-size
display mode automatically. The screen mode of these
displays cannot be changed.
Switches the function screen
Switches to the control screens such as Source
Control Screen.
Press the [FUNC] button.
Each time the button is pressed, the function
control screen is changed.
Setting
Picture & Easy Control Panel
Source Control Screen
Picture Panel (OFF)
⁄
• Refer to <Switches the function screen> of <Basic
Operations> of the A/V controller's manual.
Setting
Full picture mode
Zoom picture mode
Justify picture mode
Normal picture mode
Swithing the Display off mode
You can set the display off mode for the monitor.
Press the [V.SEL] button for at least 1 second.
Exit the Display off mode
Press any button.
Press the button other than the [5] and [∞]
buttons.
Switches AV OUT source
Selects an AV source to be output at the "AV
OUTPUT" terminals.
Press the [FUNC] button for at least 1 second.
Each time the button is pressed for at least 1
second, the AV output is changed.
⁄
• Refer to <Switches AV OUT source> of <Basic
Operations> of the A/V controller's manual.
5
|
English