Kenwood KOS-L702 Bedienungsanleitung Seite 10

Installation
Installation for Monitor Unit (For Headrest)
Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting and
wiring work to professionals.
Before mounting the monitor to the headrest:
• Perform the required external connections first (Accessory 1).
• Using the supplied paper template (Accessory 7), mark the area to be cut out of the headrest, then
carefully cut it.
Connect Monitor and system cord (Accessory 1).
1
Install the monitor unit in the bracket (Accessory 5).
2
Paper template (Accessory 7)
Removing the Monitor Unit (For Headrest)
Insert the removal tool (Accessory 6) deeply into the slots on each side, as shown.
1
2
Pull the monitor unit all the way out with your hands, being careful not to drop it.
10
|
English
Headrest
Accessory 6
Installation plate (not supplied)
Accessory 1
Accessory 1
Accessory 5
Monitor Unit
Screws (not supplied)