Albrecht CM2460 Bedienungsanleitung Seite 15

3 Controls
Front View
4 Operation
4.1 Power On/Off the radio
1. Turn VOL switch clockwise to power on the radio, the LCD displays the CB standard
followed by the channel number.
2. Turn the VOL knob counterclockwise, until it clicks. The radio is powered off.
4.2 Volume control
Turn clockwise to increase volume and turn counterclockwise to decrease volume.
4.3 Channel Selection
1. Shortly press microphone [UP] or [DN] to change working channel.
2. Hold microphone [UP] or [DN] to change the working channel fast.
4.4 Squelch level control (28 level and off)
1. Shortly press [SQ], until LCD shortly displays "SQ" and then displays X.X,
X.X stands for the SQ level.
0.F Squelch off
0.1 lowest Squelch level
.. ..
2.8 highest Squelch level
2. Press microphone [UP] or [DN] shortly to change SQ level
3. Hold microphone [UP] or [DN] to change the SQ level fast.
4. Shortly press [SQ] or wait for 3 seconds to store and exit.
Note: Higher SQ level require a stronger signal to open the speaker and hear the
calling.
14 English