Aycorn AY-L1-10-UK Bedienungsanleitung Seite 6

Step 8: Remove the applicator from the catch.
Step 9: Engage the hook on your lock to the LOCK position. This will allow
the magnetic key to move the hook.
Step 10: Close the door/drawer. Do not leave the magnetic key inside.
Your cupboard is now locked shut and safe.
Note: for best results please leave the locks in
24h
UNLOCKED mode for 24hrs before using to allow
the adhesive to fully set.
Note: screws are not required for standard installation as the adhesive is very strong.
10 | English
Opening the door
Important: Your magnetic key is attached to a key holder. Twist the key to remove
it before use to increase the magnetic reach.
To open your locks, simply place the magnetic key over the lock and pull the
door/drawer simultaneously.
If the door does not open, check:
1. The magnetic key is being placed in the correct location. Your pack
includes small padlock stickers to stick on the outside of your
door/drawer as a reminder of where the lock is located.
2. The door is not thicker than the maximum dimensions supported
(38mm/1.5").
Key storage
Your magnetic key can be stored safely on most surfaces. To install:
• Remove the label from the back of the key holder.
• Place the key holder high and safe from access by children.
• Attach the key by placing it against the holder and gently rotating
it clockwise.
Scan me
For more information on installation visit aycorn.com/user-guide or contact
support@aycorn.com.
English | 11