Foscam FI9928P Benutzerhandbuch Seite 7

Tips: You need to connect to the 2.4GHz network if your WiFi router is dual-band-most
newer routers have both 2.4GHz and 5GHz channels. For example, choose SSID:
XXXXX_2.4G.
5. Open the foscam APP and please register a Foscam account, or sign in if you have
one already.
6. After logging into Foscam APP, select "Tap to add a camera" or "+" icon on the
upper right corner, then select "Scan the QR code" and scan the QR code that
labeled at the bottom of your camera.
Tap + icon
7. There are two options in the following steps, please pay attention to choose the
corresponding adding method.
7.1 Please wait for a few seconds, you can tap "Configure WiFi" in "Configure WiFi"
interface, then select your WiFi network and enter your WiFi's password. After, you can
set the camera name and tap "Save" in "Set name" interface.
Select „Scan the
code"
7
Scan the QR code which is
located at the bottom of your
camera.