Chauvet DJ Festoon Schnellanleitung Seite 5

EN
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect
the product from power via breaker or by unplugging it.
Power Linking
For the maximum number of Festoon that can be power linked at 120 V or at 230 V, see the User Manual or the label on
the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
4
QUICK REFERENCE GUIDE
Power In
Fuse Holder
Power Out to Next Product
Festoon QRG Rev. 1