Koenic KWM 7122 B INV Bedienungsanleitung Seite 33

Start washing
1. Turn on the washing machine with the on /
off switch.
2. Use the program selector to select a
suitable program and, if necessary, a
suitable additional function. Please refer to
the following Program table.
3. Use the TEMP. button to change the
temperature if the preset temperature does
not meet your requirements. The higher the
temperature the more energy is consumed.
4. If necessary use the SCHLEUDERN button
to select a different spin speed if the preset
speed does not meet your requirements.
The higher the spin speed, the drier but
also more creased the laundry will be. High
speeds also reduce the life of the washing
machine.
Note:
Only use low spin speeds for delicate
garments.
5. By pressing the additional function button
FUNKTION, select one of the additional
functions Vorwäsche (pre-wash) or Extra
Spülen (extra rinse). The washing time
increases or decreases accordingly.
6. Start the washing process by pressing the
Start/Pause button.
IM_KWM7122B_INV_201118_V10_HR.indb 33 IM_KWM7122B_INV_201118_V10_HR.indb 33
7. Press the timer button STARTZEIT
VERZÖGERT to set a later time for the
machine to start. By pressing the button
several times, a start time of 1 to 24 hours
can be set in 1-hour increments. To do
so, follow the steps 1 to 5, then use the
STARTZEIT VERZÖGERT button to set the
start time, wait until the display shows the
wash time and then press the Start/Pause
button. If the preset time has elapsed, the
washing machine will automatically turn on
and the washing time will be shown on the
display.
8. You can also create your own program
and save it under program point Mein
Programm (My cycle). Turn the program
selector to your desired program. Set the
required temperature, spin speed and special
functions. Then press the SCHLEUDERN
button for 3 seconds to save the settings.
The program remains stored and can be
changed at any time as described above.
Caution
The door may only be opened if the
appliance is not running, e.g. after a washing
program has is finished. Do not try to open
the door while the appliance is running.
English
33
18/11/2020 4:19 PM 18/11/2020 4:19 PM