Sony α7R III Gebrauchsanleitung Seite 15

Notes on the cable protector
Use the cable protector to prevent a cable from being disconnected when
shooting images with the cable connected.
To attach the cable protector
 Thread the cable through the cable protector.
 Open both of the jack covers on the monitor side and insert the cable
into one of the jacks.
 Fit the hook of the cable protector
into the slit under the Multi/Micro
USB Terminal.
• Attach the cable protector as
illustrated so that the upper jack
cover fits into the notch in the cable
protector, and then insert the claw of
the cable protector into the slit next to
the HDMI micro jack.
 Push the attachment screw in and
turn it to secure the cable protector.
 Insert the cable into the holding part
and then secure the cable with the
fixing dial.
To remove the cable protector
Loosen the attachment screw. Push
down the upper part of the cable
protector and pull it out as illustrated.
Insert the upper jack
cover into the notch
Attachment
screw
Fit the hook into
the slit
GB
Fixing dial
GB
15