Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
CAUTION
1. Always use cold water when filling the kettle.
2. The water level must be between the MAX. and MIN. levels!
Hot water may spurt out if the kettle is overfilled.
3. Switch off the kettle before removing it from the base.
4. Always make sure the lid is well closed.
5. The base and kettle body should not be wet.
6. Only use the kettle in combination with its original base.
USING THE APPLIANCE
Boil clean water twice before using the appliance for the first time.
1. Fill the kettle with water. Do not overfill the kettle, watch the water level indicator.
2. Place the kettle on its base.
3. Switch the appliance on after putting the plug into the outlet. The ON light indicates the water is
being heated.
4. The kettle will switch off automatically after the boiling process has finished.
5. Unplug the cord from the outlet.
6. Do not open the lid when pouring the water out.
MAINTENANCE AND CLEANING
Always unplug the cord from the outlet before cleaning!
Wipe the outside of the appliance with a moist cloth and then wipe dry.
The scale filter can be removed for the cleaning process. Use designated and commonly available
agents to remove scale from the kettle.
TECHNICAL INFORMATION
Capacity 1.5 l
Covered heating element
Central connector
Rotation on the base by 360°
Overheating protection for operating kettle without water
Removable and filter to prevent scale
Optical On indicator
Nominal voltage: 220–240 V~ 50/60 Hz
Nominal input power: 1850–2200 W
14
Werbung
