Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
pico ADC-200
1.5 Installation
1.5.1 Package contents
The ADC-200 package should contain the following items:
C
ADC-200 unit
C
25 way parallel cable
C
Power supply
C
Software pack
C
ADC-200 manual
1.5.2 Software
Installing under DOS
1.
Insert the Pico CD into your CD-ROM drive
2.
Type d:\dos\install (where 'd:' is your CD-ROM drive)
3.
Press the Enter key
4.
Follow the instructions given to you by the program
Installing under Windows 3.x
1.
Insert the Pico CD into your CD-ROM drive
2.
Select File from the program manager main menu
3.
Select Run from the File menu
4.
Type d:\windows\full\setup (where 'd:' is your CD-ROM drive)
5.
Press the Enter key
6.
Follow the instructions given to you by the program
Version 2.2
installation guide
Page 5
pico ADC-200
Installing under Windows 95/98/ME/NT/2000
1.
Insert the Pico CD into your CD-ROM drive,
If Autorun is enabled the CD will startup automatically:
If so, go to step 6
2.
Press the Start button and select Run...
3.
Type d:\index (where 'd:' is your CD-ROM drive)
4.
Press the Enter key
5.
Click the "Install Application Software" button on the menu
6.
Follow the instructions given to you by the program
The computer will ask you a number of questions, then copy the files that
you have selected onto your hard disk.
The software will normally be installed in a directory called C:\PICO and
the software drivers in the sub-directory called C:\PICO\DRIVERS
Page 6
installation guide
Version 2.0
Werbung
Inhaltsverzeichnis
