GPO Rydell Radio Bedienungsanleitung Seite 3

Location of Controls
A
C
A
Power / Volume Knob
B Tone Knob
C Selector Band Buttons
D Tuning Control
4
B
G
D
E
F
E
Power Socket
(Rear of the unit)
F Battery Compartment
(Rear of the unit)
G ANTENNA
Operation Instructions
1. Please connect the power supply or insert new batteries.
2. To turn the unit on, turn the power on/off knob clockwise.
3. Deploy the Antenna.
4. Choose you desired wave band using the selector buttons.
5. Adjust the station using the tuning control.
6. Adjust the Tone Knob to your desire pitch.
7. Use the Volume knob (2) to adjust the volume as desire.
8. To turn the unit off, turn the power on/off knob anti-clockwise
until you hear a"click" sound.
Battery Compartment
Open the battery compartment located at the back of the apparatus
and introduce 6 battery 1,5V of the type UM-2/C while taking care not
to reverse the poles. Then, close the compartment.
Note:
Check your batteries regularly. Old or discharged batteries should be
replaced. If the unit is not to be used for some time or is being run
exclusively on AC electrical current, remove batteries from the battery
compartment to avoid leakage.
5