Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
This light fitting is intended for fixed installation.
•
This light fitting is intended for ceiling installation.
•
The power supply cable must have a protective earth wire (green-yellow) which is to be connected
to the Earth terminal
Description
1. Ceiling light fitting with attached terminal
block (a) and hanging bracket (b) plus
separate distance ring (c)
2. Glass diffuser
3. Lamp plug and cable (d)
The installation should only be performed
by those with knowledge of electrical
wiring. If unsure, contact a qualified
electrician. Carefully read the instructions
before the installation.
2
Caution! Closely check that the power is
shut off before starting the installation.
1. Connect the lamp plug's wires (d) to
the terminal block (a) according to
the wiring diagram.
2. Place the distance ring (c) on top of
the light fitting. Plug the lamp plug into
the ceiling socket.
3. Hang the light onto the ceiling hook.
4. Attach the fitting securely to the ceiling
by tightening the wing nuts (e) on the
hanging bracket.
5. Screw in a light bulb (max 60 W, E27).
6. Unscrew one of the diffuser's retainers (f).
Mount the glass diffuser. Refit the screw
and tighten ensuring that the diffuser sits
securely in place.
on the terminal block as shown on the wiring diagram.
1
3
Wires to the light source
4
d
Ceiling cable
N
L
Connection block
= Earth (Yellow-Green)
L =
N =
N
L
e
f
a
b
c
Live (Brown)
Neutral (Blue)
e
f
f
Werbung
