Werbung
Verfügbare Sprachen
Verfügbare Sprachen
With the OK button you can set or remove a mark.
When a mark is removed; this source does not appear
in the OSD when you press the "
remote control.
Note: Once you have connected optional equipment systems
to your TV, you should select the required input to view
pictures from that source.
Note: YPbPr mode can be use only when you connect a
device that has a YPbPr output through the PC input with
YPbPr to PC cable (YPbPr cable is not supplied).
PC Mode Menu System
See "Connecting the LCD TV to a PC" section for
connecting a PC to the TV set.
For switching to PC source, press "
remote control and select PC input. You can also use
"Source" menu to switch to PC mode.
Note that PC mode menu settings are available only while
the TV is in PC source.
PC Position Menu
S e l e c t t h e f i r s t i c o n b y p r e s s i n g " " o r
" " button. PC Position menu appears on the screen:
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
Select Autoposition item by using " " or " " buttons.
Press "OK" or " ", " " button.
Warning: Please ensure auto adjustment is performed
with a full screen image to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right hand
side or left hand side of the screen.
Select H Position item by using " " or " " button.
Use " " or " " button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top
" button of the
or bottom of the screen.
Select V Position item by using " " or " " button.
Use " " or " " button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Select Phase item by using " " or " " buttons. Use
" " or " " button to adjust the value.
Dot Clock
" button on your
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
Select Dot Clock item by using " " or " " buttons.
Use " " or " " button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following:
Press " " or " " button to select the second icon. PC
Picture menu appears on the screen.
Contrast, Brightness, Colour and Colour
Temperature settings in this menu are identical to
settings defi ned in TV picture menu under "Analogue
TV Menu System".
Note: If you set Colour Temp as User, you can defi ne R, G,
B settings manually.
Sound, Feature and Source settings are identical to the
settings explained in Analog Tv menu system.
Displaying TV Information
Programme Number, Programme Name, Sound
Indicator and Zoom Mode information is displayed
on the screen when a new programme is entered or
"INFO" button is pressed.
When you are in DTV Mode and press " " or
" " button, the Information of the previous or next
programme is displayed. To switch to the displayed,
programme just press OK button.
Mute Function
Press "
be displayed in the upper side of the screen.
To cancel mute, there are two alternatives; the fi rst
one is pressing the "
is increasing the volume level.
English - 54 -
" button to disable sound. Mute indicator will
" button and the second one
Werbung
