Whirlpool WVE1883 NF W Produktangaben Seite 4

STAND-BY FUNCTION
To activate the Stand-by function, press button A for 3 seconds and the appliance will switch off. To switch
it back on, press button A again.
ALARM SIGNAL
Temperature alarm
Note:
The temperature alarm may activate if the door is left open for a prolonged period of time or following
the introduction of fresh food in the freezer compartment; this temporary rise in temperature does not
affect the storage of already frozen food in any way.
DEFROSTING
(for No Frost models no operation is required)
This appliance defrosts automatically according to usage and ambient humidity
conditions.
Follow the steps detailed in "Switching on the appliance".
For non No Frost models, follow steps (1-6):
1. Press button A (the freezer on/off button) for 3 seconds.
2. Unplug the appliance or switch off at the main switch.
3. Fit the drain in place (see figure).
4. Follow the instructions given in the instructions booklet.
5. Plug in the appliance once again.
6. Press button A, the /freezer on/off button.
Follow the steps detailed in "Switching on the appliance".
D
Signal
Led B lights up
GB F NL E P
Cause
The internal
temperature is
above -12°C
I GR S N DK
Solution
Keep the door closed until
the alarm deactivates.
FIN