Adam Hall SKDB040 Bedienungsanleitung

SKDB040
Triangle Base Speaker Stand
SAFTY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/
downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Ans-
pach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Speaker stand with triangular base
Steel tray with isolating foam strips
Black powder coating finish
35 kg load capacity
Cable clips and spikes included
INTRODUCTION
Featuring a heavy triangular base and 28 x 28 cm tray with isolating foam rests, this nonadjustable speaker
stand is ideal for monitor and home speakers. The rugged all-steel construction with black powder coating
and a fixed height of 86 cm (2.8 ft), supports a maximum load of 35 kg (77 lbs) and comes with a set of spikes
and 4 cable clips.
SPECIFICATIONS
Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
Model number:
Product type:
Type:
Tubing material:
Tubing colour:
Tubing surface:
Min height:
Max height:
Height adjustment:
Base type:
Base edge length:
Max. load:
Weight:
Additional information:
SKDB040
Stands and Tripods
Speaker Stands
steel
Black
powder coated
860 mm
860 mm
no
triangle
445 mm
35 kg
4,87 kg
Cable routing (4 Pcs.) and spikes (3 Pcs.) included,
Footprint for loudspeakers 280 x 280 mm