Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Programming mode «on»
press quickly: 2x red (R; R; ...LED on)
2. Programming zero position
press quickly: 1x left green & right green (0% & 100%; ...LED
blinks 1 s)
3. Switch sense of rotation (optional)
press quickly: 1x red (R; ...LED blinks 1 s)
4. Mode "off"
press quickly: 2x red (R; R; ...LED blinks 1 s, LED off)
Standard programming I
(initial and final position)
1. Programming mode «on»
press quickly: 2x red (R; R; ...LED on)
2. Put transmitter into initial position
Program 0%
press quickly: 1x left green (0%; ...LED blink 1 s)
3. Set tramsmitter to final position
program in time intervals < 60 min 100%
press right green key 1x quickly (100%)
4. Transmitter final position reached
program 100%
press right green key 1x quickly (100%)
13. Declaration of conformity
16
5. Switch sense of rotation (optional)
press quickly: 1x red (R; ...LED blink 1 s)
6. Mode «off»
press quickly: 2x red (R; R; ...LED blink 1 s, LED off)
To restore the factory settings (RESET):
1. Programming mode "on"
press quickly: 2x red (R; R; ...LED on)
2. Keep red key pressed (> 3 s)
(R; ...LED blinks 1 s; LED off)
11. Ordering information of variants
Description
KINAX N702
12. Accessories
Description
Connector M12x1 / 5 poles
Kit mounting clamp N7xx
Mounting plate N7xx
Connecting cable to N702 / Length 3m
Article No.
157 083
Article no.
168 105
168 353
168 379
169 757
Werbung
