Philips Philishave T 301 Bedienungsanleitung Seite 11

• After every use:
- Pull the comb attachment from the appliance (fig. 10).
- Pull the cutting unit backwards (fig. 13).
- Clean with the brush (fig. 14, 15).
Replacing the cutting unit
If damaged or worn, a new cutting element can be bought
from the Philips Service Centre. Replace the cutting unit as
follows:
- Remove the old cutting unit by pulling it backwards
(fig. 13) and then pulling it upwards.
- Place the two notches of the new cutting unit into the
guide slots (fig. 16).
- Push the cutting unit down ('Click'!) (fig. 17).
11