Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Due to the temperature variation in different
environments (room, bed, etc.), APS LED may
change between green and orange colors
within seconds which indicates continuous
heating when the heating pad is in use. Under
this circumstance, please note the product is
functioning properly and normally.
Red light and Beep sound – Possible malfunction
or overheating, stop immediately.
The red light and beep sound give warning for
the below situations:
When the power is on but detachable plug-
•
in connector (6) is not connected: There will
be beep sound every second. Please connect
the detachable plug-in connector (6) to the
connection box (7) and switch on the
controller again.
When the critical components are damaged:
•
There will be continuous beep sound. Please
disconnect the mains cable from wall outlet
immediately.
When the heating wires or other components
•
are broken and the device cannot work
anymore: there will be beep sound every
second.
When the heating pad (8) is folded or
•
covered completely, the device will reach
higher temperature: there will be beep sound
every 2 seconds.
Please switch it off and check if incorrect using.
14
Werbung
