Seite 4
Einhandbremse, Nachrüstsatz Art.-Nr.: 1826 Sechskant-Schrauben an den vorhandenen Bremsen lösen, bis sich die Bremse von den Rohren nehmen lässt. (Abb. 1) Jeweils den Bowdenzug aus den Bremsen herausnehmen. (Abb. 2) Beide Bowdenzüge in die Einhandbremse einführen. Dabei darauf achten, dass der Bowdenzug für das linke Rad links in die Bremse gebaut wird und genauso...
Seite 5
One-hand brake, retrofit kit Item code: 1826 Loose the screws on the existing brakes until the brake can be removed from the pipes. (fig. 1) Remove the Bowden cable from the brakes. (fig. 2) Insert both Bowden cables into the one-hand brake. Make sure that the Bowden cable for the left wheel is built into the brake on the left and also the right one.
Seite 6
Fördergemeinschaft für Kinder- und Jugendrehabilitation e.V. Thomas Hilfen für Körperbehinderte GmbH & Co. Medico KG · Walkmühlenstr. 1 · D - 27432 Bremervörde · Germany Phone: +49 (0) 4761 8860 · Fax: +49 (0) 4761 886-19 · info@thomashilfen.de · www.thomashilfen.com...