VelLight LEDA30xW Bedienungsanleitung Seite 5

 Familiarise yourself with the functions of the device before actually
using it. Do not allow operation by unqualified people. Any
damage that may occur will most probably be due to
unprofessional use of the device.
 All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
 Only use the device for its intended purpose. All other uses may
lead to short circuits, burns, electroshocks, lamp explosion, crash,
etc. Using the device in an unauthorised way will void the
warranty.
 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
 A qualified technician should install and service this device.
 Keep this manual for future reference.
4. Features
 LED ceiling light
 easy installation: spring clip mounting
 high-brightness neutral white or warm white LEDs.
5. Installation
Refer to the illustrations on page 2 of this manual.
1. Have the electrical wiring carried out by a qualified technician.
The power adaptor must be connected to a suitable power
supply (220 - 240 VAC).
2. Cut a hole in the drywall or wooden panel with shape and size as
indicated in the illustration [6] on page 2.
3. Connect the power plug [7] to the power adaptor [8].
4. Push the springs upwards and push the fixture in the opening.
The springs hold the fixture in place.
6. Cleaning and Maintenance
 Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.
 There are no user-serviceable parts. Contact your dealer for spare
parts if necessary.
V. 01 – 15/01/2016
LEDA30xW/LEDA31xW
5 ©Velleman nv