Maintenance And Troubleshooting - Alzatools At-Ccs20V Bedienungsanleitung

MAINTENANCE AND TROUBLESHOOTING

MAINTENANCE
Regular inspections and cleaning of the machine reduce the need for service and keep the machine
in good condition.
The motor must be sufficiently cooled during cutting. Keep the air vents clean and regularly dusted.
TROUBLESHOOTING
Note: Remove the battery from the device before adjustment and maintenance.
Problem
The engine does not start.
The engine is running slow/
with no power.
Poor cutting output.
The saw vibrates.
Important: All repairs to the machine must only be carried out by a qualified service.
16 ENGLISH
Possible cause
– The battery is empty.
– The battery is defective.
– The battery is empty.
– The battery is defective.
– Blunt saw.
– Poorly mounted disc.
– Incorrect disc
– The disc is deformed.
– Poorly mounted disc.
Solution
– Charge or replace the bat-
tery.
– Replace battery.
– Charge or replace the bat-
tery.
– Replace battery.
– Replace the saw disc.
– Remove and reattach the
disc according to the in-
structions.
– Choose the correct disc ac-
cording to the work - see the
information on the wheel.
– Stop the machine and re-
place the blade.
– Stop the machine and re-
move and restart