Comprag RDX Serie Bedienungsanleitung Seite 15

3.3 Preparation of facility
Remove the dryer from the pallet. Ensure that the floor of the facility can withstand the
weight of the dryer. Install the dryer on a level surface that is able to bear its weight.
Regulate the horizontal axis of the dryer using a leveling instrument. The gradient from the
horizontal surface must not exceed 3
cannot permeate. Choose a facility for installing the dryer with a minimum level of dust.
Install the dryer at least 1.5 m from a wall. A minimum 0.5 m should be allowed between
the rear side of the dryer and a wall. The facility in which the dryer is installed must be good
ventilated or fitted with a combined extract-and-input ventilation system.
3.4 Preparation of compressed-air line
Connect the dryer to the compressed-air line. Provide the throughput capacity of the
compressed-air line in accordance with the capacity of the dryer.
COMPRAG RDX series compressed air refrigerated dryer
. Install the dryer in a facility in which precipitation
0
All components of the compressed air line must have a working
pressure no less than the dryer's nominal pressure.
Connection symbols
IN OUT
15