Air-Flow Setting; Maintenance - Ritmo STARGUN LINK Bedienungs- Und Wartungsanleitung

AIR-FLOW SETTING

Set 45 push button 3 to confirm.
7
3 6
Use buttons 6 and 7 to set the air flow.
Push button 3 to confirm.
X 1000: 23/18
▊▊▊▊▊▊▊▊▊
7
3 6

8. MAINTENANCE

Warning
•
Disconnect extruder from electrical line before performing any
maintenance intervention.
Let specialized technicians to perform maintenance on the welder.
•
Before any intervention, wait for the complete cooling of the extruder.
COMMUTATOR/BRUSH SEATER CLEANING
Use a brush seater stone to clean the commutator. Repeat procedure at
least once per brush replacement.
18 EN
NUMBER?
45
AIR FILTER CLEANING
Periodically clean the air grilles with a compressed air gun.
Warning
Do not use corrosive detergents
We recommend to clean the STARGUN LINK after every use.