AUDIOLINE AB 880 Bedienungsanleitung Seite 25

3. Confirm by pressing c. The currently set weekday appears in the display.
4. Set the weekday required by pressing selection button y or z.
5. Confirm by pressing c. The message ZEIT EINSTELLEN appears in the display.
6. Confirm by pressing c. The hour indicator flashes in the display.
7. Set the hour required by pressing selection button y or z.
8. Confirm by pressing c. The minute indicator flashes in the display.
9. Set the minute required by pressing selection button y or z.
10. Confirm by pressing c. The message DATUM EINSTELLEN appears in the display.
11. Confirm by pressing c. The day indicator flashes in the display.
12. Set the day required by pressing selection button y or z.
13. Confirm by pressing c. The month indicator flashes in the display.
14. Set the month required by pressing selection button y or z.
15. Confirm by pressing c. The message ORTSVORWAHL appears in the display.
16. Confirm by pressing c. The cursor flashes at the first position.
Press the selection button y or z to set the first number of your local access code.
17. Confirm by pressing the c button and the cursor flashes at the second position.
18. Press the selection button y or z to set the second number of your local access code.
19. Confirm by pressing c and proceed in the same way to complete the number. In the case of
short access codes, press the c button several times on completion until the message
LANDESVORWAHL appears in the display.
20. Confirm by pressing c. The cursor flashes at the first position.
21. Enter the international dialling code 0049" in the same way as for the local access code.
22. Confirm by pressing c.
Input is now completed. The current data appears in the display.
S
If you ever want to change the basic settings, start Programming mode by pressing
the button  for 4 seconds. Use the selection buttons y and z to
navigate in the menu. Press the c button to select the respective menu option.
S
If you had a power breakdown and the battery becomes fully discharged, the basic
settings must be entered again.
S
To delete a digit from the local access or international dialling code, use the
selection button y or z set a minus sign (−).
Press the C button to exit from the menu at any time.
S
S
If there is no input for a period of 30 seconds, programming is automatically
cancelled.
th u/CHECK b tt
P t h k th d d ti
Starting Up
t
25