Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Underneath existing work top
(When fitting beneath a work top)
In most modern fitted kitchens there is only one
single work top under which cabinets and
electrical appliances are fitted. In this case remove
the work top of the dishwasher by unscrewing the
screws under the rear edge of the top (a).
Attention
After removing the work top, the screws must be screwed again under the rear edge
of the top (b).
The height will then be reduced to 815 mm, as scheduled by the International
Regulations (ISO) and the dishwasher will fit perfectly under the kitchen working top
Place the condensation water strip (3)
under the work surface of the cabinet.
Make sure that the condensation strip is
flush with the edge of the work surface.
Place the dishwasher in position.
20
a
a
b
b
3
4
Werbung
