Reolink Doorbell Bedienungsanleitung Seite 7

Step 3 Run the Ethernet cable through the mounting plate and the hole on
the wall to connect it to the doorbell, then attach the doorbell to the plate.
Step 4 The doorbell is powered by connecting the other end of the
Ethernet cable to a PoE device.
2
11 English
Reolink Video Doorbell WiFi
Step 1 Put the mounting hole template on the wall by the door and drill
holes as shown.
Step 2 Install the mounting plate using the long screws provided through
the two holes.
PoE
English 12