nedis HTFA20WTW Kurzanleitung Seite 6

Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap Continue.
You will receive a verification code on your e-mail address.
4
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with
and tap Done.
Adding a product to the Nedis SmartLife app
1. Press the on/off switch A
r
2. Press and hold the oscillation/Wi-Fi button A
The Wi-Fi indicator C 1 blinks fast and a beep sounds to indicate
4
pairing mode is active.
3. Tap + in the Nedis SmartLife app.
4. Select the product type you want to add from the list.
5. Follow the instructions in the Nedis SmartLife app.
6. After confirming you can control the product with your
smartphone.
To connect your SmartLife account to Amazon Alexa and/ or Google
Home, set it up using the "Smart Life" action or skill. For more details
check the instruction on either Amazon or Google.
The Wi-Fi indicator C
1 lights up when the product is connected.
4
Installing the product
Place the product on a stable and flat surface.
Keep objects at least 50 cm from the air inlet A
4
Keep objects at least 1 meter from the air outlet A
4
Switching on the product
1. Plug the power cable A e
2. Press the on/off switch A
r
The display shows the current room temperature C
4
3. Press the power button A
7
The display A 1 switches on.
Indicators (image C)
The display A
1 contains the following:
1 Wi-Fi indicator
Low power indicator
2
High power indicator
3
Switching between power settings
1. Press the mode button A
6
2. Choose between:
• Low power mode
• High power mode
The low power indicator C
2
4
in low power mode.
The low and high power indicator C
4
product is in high power mode.
Setting the timer
1. Press the timer button A
5
2. Press the timer button A
5
The maximum countdown time is 12 hours.
4
3. Switch off the timer by pressing the timer button A
when the time is set to maximum.
The timer is cancelled when the product is switched off.
4
Setting the temperature
1. Press the temperature up and down buttons A
the set room temperature.
When the room temperature reaches the selected level, the
4
to switch on the product.
4 for 3 seconds.
w .
8 .
into a power outlet.
to switch on the product.
4 .
.
4 Current room temperature
Timer indicator
5
Oscillation indicator
6
to switch between power settings.
lights up to indicate the product is
23 light up to indicate the
to set a countdown timer.
to increase the timer with 1 hour.
5 once more
to adjust
32
built-in thermostat automatically switches off, the fan remains
working.
When the room temperature decreases, the built-in thermostat
4
automatically switches back on.
Switching the oscillation on/off
1. Press the Wi-Fi/oscillation button A
on/off.
The oscillation indicator C
the oscillation mode is activated.
Overheat protection
The product switches off automatically in case of overheating, e.g.
due to the total or partial obstruction of the air inlet or the air outlet
grid. After overheating, allow the product to cool down for at least
30 minutes before using it again.
Tip-over safety switch
The tip-over safety switch automatically switches off the product
when it falls over. Before using the product again: Switch off the
product, disconnect the power plug and check for damage.
Switching off the product
1. Press the power button A
2. Press the on/off switch A
3. Unplug the power cable A
Disposal
The product is designated for separate collection at
an appropriate collection point. Do not dispose of the
product with household waste.
For more information, contact the retailer or the local
authority responsible for the waste management.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product
HTFA20WTW from our brand Nedis®, produced in China, has been
tested according to all relevant CE standards and regulations and
that all tests have been passed successfully. This includes, but is not
limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via:
nedis.com/HTFA20WTW#support
c
Kurzanleitung
WLAN-Smart
Keramik-Heizlüfter
Weitere Informationen finden Sie in der erweiterten
Anleitung online: ned.is/htfa20wtw
Bestimmungsgemäße Verwendung
Dieses Produkt ist eine Heizung, die dem Benutzer die Kontrolle der
Umgebungstemperatur ermöglicht.
Dieses Produkt kann über die Nedis SmartLife-App, die Tasten am
Produkt oder mit der mit der mitgelieferter Fernbedienung bedient
werden.
Dieses Produkt ist nur für gut isolierte Räume oder für den
gelegentlichen Gebrauch geeignet.
Das Produkt ist nur zur Verwendung innerhalb von Gebäuden
gedacht.
Das Produkt ist zur Verwendung in Haushaltsumgebungen
für typische Haushaltsfunktionen gedacht, die auch von nicht
fachkundigen Benutzern ausgeführt werden können, wie z. B.:
in Geschäften, Büros und ähnlichen Arbeitsumgebungen,
6
49 to switch the oscillation
6 appears on the display A 1
.
7
r to switch off the product.
e from the power outlet.
HTFA20WTW
to indicate