Wahoo KICKRmove Bedienungsanleitung Seite 5

KICKR MOVE SETUP
Prior to setting up your KICKR MOVE, ensure the lock lever is securely locked to avoid risk of injury.
Place your KICKR MOVE on a stable, level surface and open the legs by (1) pressing down on the blue leg-lock tabs and (2)
pivoting the legs outward until they snap in place.
(NOTE: Ensure the leg-lock tabs have popped back up and secured the legs in an open position.)
(1)
(3) Use the included AC power adapter to connect the trainer to a standard wall outlet.
To stabilize the trainer, adjust the two leveling feet (4a) by twisting them left or right until the trainer is level and (4b) lock
them into place by tightening the blue locknuts against the KICKR MOVE leg frame.
(3)
Adjust the height of the trainer to fit your specific wheel size by (5) relocating the height adjustment knob on the
center leg to the appropriate setting. If you are unsure of your wheel size, check the tire sidewall or consult your local
bike shop.
(2)
(4)
(b)
(a)
(5)
Pinch Point Hazard. To prevent
serious injury:
•ALWAYS keep your hand away from moving
parts.
•NEVER reach into KICKR MOVE.
•ALWAYS lock KICKR MOVE when not in use.
Check that your trainer is stable
before every ride; if needed re-adjust the
leveling feet.
4