Concept OM4000 Bedienungsanleitung Seite 14

EN
PRODUCT DESCRIPTION
A
Silicone breast insert
B
Breast shield
C
Silicone against leakage
D
Top cover
E Valve
F Bottle (160 ml)
G Breast shield cover
H Connecting tube
I Connector
J Sealing cover
K Motor unit with LED touch screen
L USB adapter
M USB cable
TROUBLESHOOTING
Pain during use
1. Warm the breasts for five minutes before using the breast pump.
2. Start at the lowest level of suction and then gradually increase.
3. If the above tips have not solved your problems, stop using this product and consult your
doctor.
The device is not working.
Check if sufficient power is available, if so, connect a power adapter when using.
Low or no suction power
1. Check all components to ensure they are connected correctly.
2. Make sure that both ends of the tube are properly inserted into the motor unit and top cap.
No milk suction
Ensure that the breasts are aligned with the breast shield with no gaps between them, start
pumping using a low suction level.
26
Panel layout
1 Button to increase suction
2 Nasal suction
3 Suction reduction button
4 ON/OFF button
5 Stimulation/suction mode
6 Night light
OM4000
CLEANING AND MAINTENANCE
After use, wipe the motor with a clean damp cloth.
Do not clean the motor and adapter in water.
Except for the motor and adapter, you can put the other parts in the sterilizer.
When assembling and disassembling the breast pump, make sure that all components are
assembled correctly.
Do not clean the base by immersing it in water. We recommend wiping it only with a clean cloth.
SERVICE
Extensive maintenance or repair, which requires access to internal parts of the product, has to be
performed by a qualified service centre.
ENVIRONMENTAL CONCERNS
•
Packaging materials and old appliances should be recycled.
• Packaging materials may be disposed of as sorted waste.
• Dispose the plastic bags made of polyethylene (PE) of as sorted waste.
Recycling of the appliance at the end of its lifespan
This appliance is labelled in accordance with European Directive 2012/19/
EU concerning used electrical and electronic appliances (Waste Electrical and
Electronic Equipment - WEEE). The symbol on the product or on its packaging
indicates that this product may not be treated as household waste. Instead, it
should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste
handling of this product. The disposal of such material has to be done according
to the recycling regulations. For more detailed information about recycling of
this appliance see the authorized local office or service for household waste
disposal or the shop, where you purchased the appliance.
The product meets all the necessary requirements of the EU directives
applicable to the specific product.
Changes in text, design, and technical specifications are subject to change without notice and we
reserve the right to change them.
OM4000
EN
27