Herunterladen Diese Seite drucken

Werbung

Service
KURZBESCHREIBUNG
Die Mikroport-Taschensender SK 50 UHF und SK 250 UHF sind
für den Frequenzbereich von 450 - 960 MHz ausgelegt. Innerhalb
einer Schaltbandbreite von 24 MHz können bis zu 16 Kanäle
geschaltet werden. In Verbindung mit einem angeschlossenen
Mikrofon ist der Sender als drahtloses Mikrofon einsetzbar.
Durch seine flache Bauform und die geringen Abmessungen ist
dieses Gerät in besonderer Weise für Anwendungsfälle
geeignet, bei denen eine möglichst unauffällige Trageweise
verlangt wird, wie es z.B. bei Film- und Fernsehproduktionen
der Fall ist. Zur Reduzierung von Störeinflüssen und zur
Verbesserung des Geräuschspannungsabstandes sind die
Sender SK 50 UHF und SK 250 UHF mit dem Rausch- und
Störunterdrückungssystem »HiDyn Plus« ausgerüstet.
MERKMALE
Metall-Druckgußgehäuse mit Schnellwechsel-Energiepack
Innerhalb der Schaltbandbreite von 24 MHz sind 16 Kanäle
schaltbar (PLL-Technik)
"HiDyn Plus" Kompander
Geräuschspannungsabstand von 110 dB (A)
Integrierter Spannungswandler für konstante Ausgangs-
leistung bis zur Entladung der Batterien oder Akkus
Betriebszeitanzeige mit Blinkwarnung
Betriebs- und Spitzenhub-Anzeige
Sennheiser electronic KG D-3002 Wedemark Tel. 0 51 30 / 600 -0
Änderungen vorbehalten / Alterations reserved / Modifications réservées
SK 50 UHF
SK 250 UHF
BRIEF DESCRIPTION
The SK 50 UHF and SK 250 UHF Mikroport body-pack trans-
mitters are designed for the frequency range from 450 - 960
MHz. Within a switching bandwidth of 24 MHz, up to 16
channels can be selected. In combination with a microphone,
the transmitter can be used as a cordless microphone. To
reduce interference and to improve the signal-to-noise ratio, SK
50 UHF and SK 250 UHF transmitters are equipped with the
"HiDyn Plus" noise reduction system. In combination with a
receiver which is also equipped with this system (e.g. EM
1046), a link can be established which is characterised by
excellent operational reliability and superb transmission quality.
FEATURES
Diecast housing with quick-change battery pack
State-of-the-art PLL technology, 16 switchable channels
"HiDyn Plus" compander
Signal-to-noise ratio of 110 dB (A)
Integral DC-DC converter for constant output power
through to complete discharge of the battery or rechargeable
battery
Operating time display with blinking signal
Battery status transmission to the receiver
Operating and peak deviation indicator
SK 50 UHF / SK 250 UHF
01 / 93 – 1

Werbung

loading

Inhaltszusammenfassung für Sennheiser SK 50 UHF

  • Seite 1 1046), a link can be established which is characterised by Verbesserung des Geräuschspannungsabstandes sind die excellent operational reliability and superb transmission quality. Sender SK 50 UHF und SK 250 UHF mit dem Rausch- und Störunterdrückungssystem »HiDyn Plus« ausgerüstet. FEATURES MERKMALE •...
  • Seite 2 SK 250 UHF GEDRUCKTE SCHALTUNGEN PRINTED CIRCUIT BOARD 9.1. SK 50 UHF 8.1. SK 50 UHF 9.2. SK 250 UHF 8.2. SK 250 UHF EXPLOSIONSZEICHNUNG EXPLODED VIEW ERSATZTEILE SPARE PARTS SK 50 UHF / SK 250 UHF 01 / 93 – 2...
  • Seite 3 8 Stufen einstellbar von 13,2 mV bis 1,55 V adjustable in 8 steps (13.2 mV - 1.55 V) Mikrofonanschlußbuchse Microphone socket Lemo spezial (3-pin) Special 3-pin Lemo connector SK 50 UHF / SK 250 UHF 01 / 93 – 3...
  • Seite 4 BA 250: > 5 hrs BA 250: > 2.5 hrs German BZT Certification No. A 014 926 B ME Subject to alterations and corrections. Errors and omissions excepted. SK 50 UHF / SK 250 UHF 01 / 93 – 4...
  • Seite 5 3. BESCHREIBUNG 3. DESCRIPTION Die Geräte mit den Typbezeichnungen SK 50 UHF und SK 250 The SK 50 UHF and SK 250 UHF are miniature RF body-pack UHF sind miniaturisierte Hochfrequenz-Taschensender zur transmitters for high quality music and speech transmission.
  • Seite 6 Verstärkers wird auch das Batteriedaten- telegramm überlagert. Den Phasenlagen und Amplituden der resultierenden Modulationssignale sowie dem Design der Oszillatorschaltung sind besondere Beachtung geschenkt worden. SK 50 UHF / SK 250 UHF 01 / 93 – 6...
  • Seite 7 Die beiden Sendervarianten unterscheiden sich in der The SK 50 UHF is different from the SK 250 UHF in one respect: the SK 50 UHF has a RF output power of 50 mW at 50 Ω and Hochfrequenz-Ausgangsleistung voneinander. Der SK 50 UHF gibt eine Leistung von 50 mW an einen Abschlußwiderstand...
  • Seite 8 Batterien, eintreten können, wird der Hochfrequenzverstärker batteries, come into existence, the RF amplifier is switched off automatisch abgeschaltet. Die Betriebsanzeige am Sender automatically. The operating indicator on the transmitter SK 50 UHF / SK 250 UHF 01 / 93 – 8...
  • Seite 9 3.4.1. POWER PACKS: B 50, BA 50, B 250, BA 250 Für den SK 50 UHF stehen ein NiCd-Akku-Pack mit der The SK 50 UHF can be powered by either the rechargeable BA Typbezeichnung BA 50 und ein Versorgungsteil B 50 für 50 NiCd battery pack (AA) or the B 50 power pack with two Primärzellen (Alkali-Mangan) mit jeweils zwei Zellen der Type...
  • Seite 10 3.5. SK 50 UHF / SK 250 UHF IN STICHWORTEN 3.5. CIRCUIT DIAGRAM: SK 50 UHF / SK 250 UHF 3.5.1. HOCHFREQUENZTEIL 3.5.1. RADIO FREQUENCY SECTION A. OSZILLATOR A. OSCILLATOR Q2: Oszillatortransistor. Q2: Oscillator transistor. L4: Oszillatorspule, aufgewickeltes Koaxial-Festmantelkabel. L4 : Oscillator inductor, coaxial cable.
  • Seite 11 Verhältnisses von R71 zu R70 kann ein Eingangs- obtained by changing the ratio between R71 and R70 (R70 + spannungsteiler (Pad) erzeugt werden (R70 + R71 = 8,3 kΩ). R71 = 8K3). SK 50 UHF / SK 250 UHF 01 / 93 – 11...
  • Seite 12 For minimum gain, the control circuit is inoperative, Verstärkung ab. Bei minimaler Verstärkung ist die Regelung whereas the circuit for peak limiting is operative. ohne Wirkung und nur die Spitzenhubbegrenzung ist wirksam. SK 50 UHF / SK 250 UHF 01 / 93 – 12...
  • Seite 13 1.7 V. SK 250 UHF transmitters are switched off aufnahme ändert sich natürlich mit der Änderung der at about 2.5 V, whereas SK 50 UHF transmitters are switched Primärspannung, da dem Wandler konstante Leistung auf der off at about 1.7 V. Up to a primary voltage of 5.1 V the Sekundärseite abgefordert wird.
  • Seite 14 4.1. GENERAL Zur Reparatur und zum Abgleich der Sender SK 50 UHF und SK To repair and align SK 50 UHF and SK 250 UHF the professional 250 UHF ist eine Adaption der professionellen Steckverbinder connectors on the transmitters have to be adapted to your mittels Meßadapter an Standardmeßplätze erforderlich.
  • Seite 15 4.5. SMD (SURFACE MOUNTED DEVICES) Die Leiterplatten des SK 50 UHF / SK 250 UHF sind weitgehend The boards of the SK 50 UHF / SK 250 UHF are chiefly equipped mit Chip-Elementen (SMD) bestückt. Sollte beim Hantieren mit with Surface Mounted Devices (SMD). Handle with care.
  • Seite 16 R120 Hinweis: – - Dämpfung der Meßkabel beachten R128 - Feinabgleich im Gehäuse M-SK 50 SA Hinweis: 3.9 V - Observe cable losses - Precise adjustment in housing SK 50 UHF / SK 250 UHF 01 / 93 – 16...
  • Seite 17 – 18 dB S2 Pos. "4" – 24 dB S2 Pos. "5" – 30 dB S2 Pos. "6" – 36 dB S2 Pos. "7" – 42 dB S2 Pos. "8" SK 50 UHF / SK 250 UHF 01 / 93 – 17...
  • Seite 18 Sender 200 - 250 mW beachten! aus Gehäuse ent- nehmen; C33 50 = 50 = R51 einlöten; Sender in 25 - 50 mW Gehäuse einsetzen; Leistungsmeßgerät NOTIZEN: SK 50 UHF / SK 250 UHF 01 / 93 – 18...
  • Seite 19 70 Hz - 20 kHz Dev.: ± 40 kHz Sensitivity Connect AF As 11. generator = 0 dB to input J1: 0.775 V / 1 kHz, i.e. 0 dB SK 50 UHF / SK 250 UHF 01 / 93 – 19...
  • Seite 20 200 - 250 mW consumption transmitter out of housing; solder 50 = 50 = R51 C33 in proper 25 - 50 mW position; put trans- mitter into housing; power meter NOTES: SK 50 UHF / SK 250 UHF 01 / 93 – 20...
  • Seite 23 SK 50 UHF, GEDRUCKTE SCHALTUNG, BESTÜCKUNGSSEITE SK 50 UHF, PRINTED CIRCUIT BOARD, COMPONENTS SIDE C103 R106 R108 R105 R109 R103 R112 R116 R107 R120 R128 SK 50 UHF, GEDRUCKTE SCHALTUNG, LÖTSEITE SK 50 UHF, PRINTED CIRCUIT BOARD, SOLDER SIDE C104...
  • Seite 24 R105 R109 R103 R112 R116 R107 R120 R131 R128 SK 250 UHF, GEDRUCKTE SCHALTUNG, LÖTSEITE SK 250 UHF, PRINTED CIRCUIT BOARD, SOLDER SIDE C105 R124 R125 R114 R122 SK 50 UHF / SK 250 UHF 01 / 93 – 24...
  • Seite 25 10. EXPLOSIONSZEICHNUNG EXPLODED VIEW SK 50 UHF / SK 250 UHF 01 / 93 – 25...
  • Seite 26 SMD Kondensator KERKO 6,8pF 50V NPO (MOQ:50x) SMD capacitor KERKO 6.8pF 50V NPO (MOQ:50x) 550-680MHz 550-680MHz C028C 45171 SMD Kondensator KERKO 5,6pF 50V NPO (MOQ:50x) SMD capacitor KERKO 5.6pF 50V NPO (MOQ:50x) 680-800MHz 680-800MHz SK 50 UHF / SK 250 UHF 01 / 93 – 26...
  • Seite 27 C093 45439 SMD Kondensator TA-KO 68uF 6,3V SMD capacitor TA-KO 68uF 6,3V C094 45195 SMD Kondensator KERKO 1nF 50V X7R (MOQ:50x) SMD capacitor KERKO 1nF 50V X7R (MOQ:50x) SK 50 UHF / SK 250 UHF 01 / 93 – 27...
  • Seite 28 SMD Transistor BC860B SOT23 SMD transistor BC860B SOT23 Q014 32467 SMD Transistor BC850B SOT 23 SMD transistor BC850B SOT23 Q015 32467 SMD Transistor BC850B SOT 23 SMD transistor BC850B SOT23 SK 50 UHF / SK 250 UHF 01 / 93 – 28...
  • Seite 29 R072 45139 SMD Widerstand 15k 5% 0603 (MOQ:50x) SMD resistor 15k 5% 0603 (MOQ:50x) R073 45142 SMD Widerstand 47k 5% 0603 (MOQ:50x) SMD resistor 47k 5% 0603 (MOQ:50x) SK 50 UHF / SK 250 UHF 01 / 93 – 29...
  • Seite 30 SMD IC MB501SLPF SOL8 U006 45367 SMD IC U.DET RH5VA36AAT1 SOT89 SMD IC U.DET RH5VA36AAT1 SOT89 U007 41277 SMD IC MC33078D SO8 SUP8 SMD IC MC33078D SO8 SUP8 SK 50 UHF / SK 250 UHF 01 / 93 – 30...
  • Seite 31 SMD Kondensator KERKO 6,8pF 50V NPO (MOQ:50x) SMD capacitor KERKO 6.8pF 50V NPO (MOQ:50x) 450-580MHz 450-580MHz C028B 45172 SMD Kondensator KERKO 6,8pF 50V NPO (MOQ:50x) SMD capacitor KERKO 6.8pF 50V NPO (MOQ:50x) 540-730MHz 540-730MHz SK 50 UHF / SK 250 UHF 01 / 93 – 31...
  • Seite 32 SMD Kondensator KERKO 1nF 50V X7R (MOQ:50x) SMD capacitor KERKO 1nF 50V X7R (MOQ:50x) C095 45186 SMD Kondensator KERKO 100pF 50V NPO (MOQ:50x) SMD capacitor KERKO 100pF 50V NPO (MOQ:50x) SK 50 UHF / SK 250 UHF 01 / 93 – 32...
  • Seite 33 SMD Transistor BC850B SOT 23 SMD transistor BC850B SOT23 Q017 40353 SMD Transistor BC868 SOT89 SMD transistor BC868 SOT89 Q018 32468 SMD Transistor BC860B SOT23 SMD transistor BC860B SOT23 SK 50 UHF / SK 250 UHF 01 / 93 – 33...
  • Seite 34 R067 45136 SMD Widerstand 4k7 5% 0603 (MOQ:50x) SMD resistor 4k7 5% 0603 (MOQ:50x) R068 45294 SMD Widerstand 6R8 10% 0603 (MOQ:50x) SMD resistor 6R8 10% 0603 (MOQ:50x) SK 50 UHF / SK 250 UHF 01 / 93 – 34...
  • Seite 35 IC PROM 1Kx4 N82S129N IC PROM 1Kx4 N82S129N U002 40096 IC PLL TDD1742T SO28 IC PLL TDD1742T SO28 U003 45442 SMD IC LMC660AIM SO14 SMD IC LMC660AIM SO14 SK 50 UHF / SK 250 UHF 01 / 93 – 35...
  • Seite 36 Quarz 6000,000kHz Crystal 6000.000kHz ZZ010 18497 Etui mit Einsatz Case with insert ZZ011 42691 Faltschachtel Folding carton ZZ020 48208 Anleitung SK50/250 Manual SK50/50 Ident.- Nr. 49569 SK 50 UHF / SK 250 UHF 01 / 93 – 36 Printed in Germany...
  • Seite 37 SK 50 UHF / SK 250 UHF 01 / 93 – 37...
  • Seite 38 SK 50 UHF / SK 250 UHF 01 / 93 – 38...
  • Seite 39 SK 50 UHF / SK 250 UHF 01 / 93 – 39...
  • Seite 40 NOTIZEN: NOTES: SK 50 UHF / SK 250 UHF 01 / 93 – 40...
  • Seite 41 SK 50 UHF / SK 250 UHF 01 / 93 – 41...

Diese Anleitung auch für:

Sk 250 uhf