Kapego 843155 Bedienungsanleitung Seite 14

Manual
Article No.: 843155
7. In the following menu you can select the desired virtual controller you need to control.
8. Connect and disconnect the Wifi Box with Kapego RF controller
a. Connect the Wifi Box with Kapego RF cnotroller
You have your tablet / smartphone connected with the WiFi Box and selected your
necessary virtual controller for your lghting system.
Your light source (eg LED Stripe) is connected to the Kapego RF controller.
Connect it with the power supply to the mains.
Once the light source begins to shine, press the Power button
on your virtual controller on your tablet / smartphone and keep it pressed.
The light source flashes three times and then lights up continuously.
You can now control the Light source over your virtual controller.
b. Disconnect the Wifi Box from Kapego RF controller
Disconnect the power supply to the connected Kapego RF controller and the
Light source from the mains. Then connect this again.
Once the light source begins to shine, press the Power button on your
virtual controller on your tablet / smartphone and keep it pressed.
The light source flashes nine times and then lights up continuously.
Now you can not control your light source with your virtual controller.
6