Led Indications - Topcom BUTLER 300 DECT HEADSET Gebrauchsanweisung

B300_all Page 5 Tuesday, July 15, 2003 3:57 PM
Topcom Butler 300 Dect Headset
RIGHT OR LEFT
If you want to change the Headset to your other ear, you have to change the
orientation of the ear hook.
• Pull the ear hook from the headset as shown below.Turn the hook 180 degrees
• Attach the ear hook by gently pressing it into place

5. LED INDICATIONS

There is one LED (8) with 2 colors, one RED and one GREEN. Depending on the
situation, this LED will indicate the headset status:
When charging:
• Continue RED: The battery is charging
• RED blinking: The battery is charged but there is no link with the base
• GREEN blinking: The battery is charged and there is a link with the base
During Standby and turned ON:
• RED blinking (slow): There is no link with the base
• RED blinking (fast): Battery is low or headset is in registration mode
• GREEN blinking slowly: Standby and linked with the base (normal operation)
• GREEN blinking fast: During incoming call
During operation (conversation):
• Steady Green: Normal operation
• Steady RED: Battery is low and need to be charged
Topcom Butler 300 Dect Headset 5