Technical Data - eta MOISTY SMART Bedienungsanleitung

EN
– After switching off, the air flow can still come out of the B2 outlet for a while to better
circulate the humidity around the room.
– The displayed humidity values are only informative and may have a certain
deviation compared to calibrated measuring devices.
IV. MAINTENANCE
Clean the surface of the appliance with a damp cloth. Rinse the tank in warm soapy water.
You may also use disinfectants but always follow the instructions provided on the packaging.
Clean the ultrasound converter with a cloth (sponge) and warm soapy water. If you use
the humidifier frequently, we recommend cleaning the tank and the ultrasound converter
at least once a week. Be aware of the fact that a contaminated ultrasound converter
will not function properly! Never use any aggressive cleaning agents for cleaning
the humidifier (such as petrol, glass cleaner, furniture polish, or paint thinner) or any
other solvents! After maintenance, let the individual parts dry properly. Never use sources
of heat to dry the plastic parts (such as oven, electric or gas stove).
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service! Failure to comply with the
instructions of the manufacturer will lead to expiration of the right to repair!
V. ENVIRONMENT
If the dimensions allow, there are marks of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at the special collection places where they will be accepted free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authority or at a collection site. Fines can be imposed for improper disposal of this
type of waste in agreement with the national regulations. If the appliance is to be put out
of operation, after disconnecting it from power supply we recommend its cutoff and in this
way it will not be possible to use the appliance again.
VI. TECHNICAL DATA
Voltage (V)
Input (W)
Weight about (kg)
Volume of container (l)
Protection class of the appliance
Size of the product (mm)
Input in off mode is < 0.50 W.
Note
shown on the type label of the appliance
shown on the type label of the appliance
1.2
5
II.
300 x 300 x 205
20 / 39