EuroLite 51930380 Bedienungsanleitung Seite 25

7-channel mode
Channel
1
Master dimmer
2
Strobe effect
3
4
5
6
Color temperature
7
Automatic program
CLEANING AND MAINTENANCE
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Value Function
Brightness 0-100%
000 – 255
No function
000 – 009
Strobe with increasing speed 0-100%
010 – 255
000 – 255 2700K (0-100%)
000 – 255 4300K (0-100%)
000 – 255 6000K (0-100%)
000 - 009 No function
010 - 019 2700K
020 - 029 3000K
030 - 039 3200K
040 - 049 3400K
050 - 059 3600K
060 - 069 3800K
070 - 079 4000K
080 - 089 4300K
090 - 099 4600K
100 – 109 4800K
110 – 119 5000K
120 – 129 5200K
130 – 139 5400K
140 – 149 5600K
150 – 159 5800K
160 – 255 6000K
000 - 009 No function
010 - 129 Automatic program 1 with increasing speed
130 - 255 Automatic program 2 with increasing speed
25/28 00129131, Version 1.0