Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.
Menu structure
Mode
DMX mode
Color temperature
Automatic mode
Running speed in automatic
mode
Individual brightness
Dimmer
Slave mode
Stand-alone mode
Color temperature
In the tEMP mode color temperature of the light beam is adjustable.
1
Press the MENU button so many times until tEMP is indicated in the display. Confirm with the ENTER
button.
2
Use the buttons UP and DOWN to select the desired show program (t 01-16). Confirm with the ENTER
button.
Automatic mode
In automatic mode, 2 show programs are available that run at an adjustable speed.
1
Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (Au 1-2). Confirm with the
ENTER button.
2
Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.
Individual brightness
The mode Colo offers the possibility to adjust the brightness of the white LEDs individually. The device will
constantly emit the brightness.
1
Press the MENU so many times until Colo is indicated in the display. Confirm with the ENTER button.
2
Now the display indicates the letter a (>2700K) for the corresponding brightness value. Use the buttons
UP and DOWN to adjust the desired brightness.
3
Confirm with the ENTER button. Now the letter b (>4300K) and then c (>6000K).
Display
7CH
Addr
3CH
tEMP
t 01-16
Auto
Au 1-2
SPEE
SP 1-9
a000-255
Colo
b000-255
c000-255
diMM
dI 1-dI 9
SLAV
Slave
23/28
d001-512
7-channel mode and start address
d001-512
3-channel mode and start address
Color temperature
Auto program
Program running speed
slow > fast
2700K (0-100%)
4300K (0-100%)
6000K (0-100%)
Total brightness (Auto and Colo
modes)
dark > bright
Slave mode
Function
00129131, Version 1.0
Werbung
