Kress KG262 Bedienungsanleitung Seite 8

Installing & removing the battery pack.(See
Fig. B3)
B3
]
OPERATION
Starting and Stopping
Before usage, remove the blade sheath first. (See
Fig. C1)
C1
EN
Press the operator presence switch and throttle
trigger to start. (See Fig. C2)
C2
8
1
2
2
Release the throttle trigger and operator presence
switch to stop. (See Fig. C3)
A2 A2
C3
2
When the equipment is not in use, turn the hedge
trimmer off and remove the battery.
How to Use your Hedge trimmer
Before cutting an area, inspect it first and remove
any foreign objects that could become thrown or
A2 A2
entangled in the blades. Always hold the trimmer
with both hands and with the blade away from you
before turning it on.
When trimming new growth, use a wide sweeping
action so that the stems are fed directly into the
blade.
Allow the cutting blades to reach full speed before
cutting. When operating, keep the cutting blades
away from people and objects such as walls, large
stones, trees, vehicles, etc.
If the blade stalls, immediately stop the trimmer.
Release the throttle trigger and operator presence
switch before attempting to clear jammed debris
from the cutting blades.
Wear gloves when trimming thorny or prickly
growth.
Do not attempt to cut stems that are too thick for
the cutting blade.
A2 A2
Top cutting (See Fig. D)
Use a wide sweeping motion. A slight downward tilt
of the cutting blades in the direction of motion gives
the best cutting results.
WARNING: If any parts are missing,
damaged or broken, do not operate your
hedge trimmer until all damaged parts have been
replaced or repaired. Failure to do so could result in
serious personal injury. DO NOT USE WITHOUT
FRONT HANDLE AND SAFETY GUARD.
A2
A2