Kress KG262 Bedienungsanleitung Seite 11

TECHNICAL DATA
Type KG262 KG262.X (250-299- designation of machinery, representative of cordless hedge trimmer)
Voltage
No-load speed
Blade length
Cutting length
Tooth spacing
Max cutting diameter
Machine weight (bare tool)
* X=1-999, A-Z, M1-M9 there are only used for different customers, there are no safe relevant changes
between these models
** Voltage measured without workload. Initial battery voltage reaches maximum of 60 volts. Nominal voltage is
54 volts.
SUGGESTED BATTERIES AND CHARGERS
Battery
KA3001
We recommend that you purchase your accessories from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store personnel can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum)
determined according to EN 62841:
Vibration emission value: a
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used especially what kind of workpiece is
processed dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
Amp
2.5 Ah
= 2.16 m/s²
h
KG262 KG262.X **
60 V Max ***
3400 /min
64 cm (25")
61 cm (24")
34 mm (1.3")
27 mm (1")
3.03 kg (6.68 lbs)
Charger
KA3713
Amperage
3.0 A
EN
L : 85.12 dB(A)
pA
K = 3 dB(A)
pA
L : 96.12 dB(A)
wA
K = 3 dB(A)
wA
11