Bosch GBH 185-LI Professional Originalbetriebsanleitung Seite 17

Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS plus drill chuck
(2) SDS plus tool holder
Dust protection cap
(3)
(4) Locking sleeve
(5) Vibration damping
(6) Mounting for suspension strap
(7) Rechargeable battery release button
(8) Rotational direction switch
(9) Handle (insulated gripping surface)
(10) On/Off switch
a)
(11) Rechargeable battery
(12) Release button for impact/mode selector switch
(13) Impact/mode selector switch
(14) Worklight
(15) Button for depth stop adjustment
(16) Auxiliary handle (insulated gripping surface)
(17) Depth stop
(18) Securing screw for keyed chuck
a)
(19) Keyed chuck
(20) SDS plus shank for drill chuck
(21) Chuck key
(22) Universal holder with SDS plus shank
(23) Attachment area for the fall protection system on
the power tool
b)
(24) Fall protection system
Noise emission values determined according to EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Bosch Power Tools
(25)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
b) Accessories shown or described are not included in the de-
livery, nor are they part of the Bosch range of accessories.
Technical Data
Cordless rotary hammer
Article number
Rated voltage
Impact rate
Impact energy per stroke ac-
cording to EPTA-Proced-
ure 05:2016
Rated speed
– Clockwise
– Anticlockwise
Tool holder
Spindle collar diameter
Max. drilling diameter
– Concrete
– Steel
– Wood
a) Weight according to EPTA-
Procedure 01:2014
Length
Height
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended rechargeable
batteries
Recommended chargers
a)
A) Measured at 20–25 °C with rechargeable battery
GBA 18V 4.0Ah.
B) Depends on battery in use
b)
C) Limited performance at temperatures < 0 °C
D) In combination with GDE 12 a > 3.0 Ah battery must be used
Values can vary depending upon the product and are subject to ap-
plication and environmental conditions. For further information
www.bosch-professional.com/wac.
Noise/Vibration Information
Fall protection system anchorage point fixer
V=
A) -1
min
J
A)
-1
min
-1
min
mm
mm
mm
mm
kg 2.6 (1.5 Ah)−3.7
B)
mm
mm
°C
°C
C)
and
D)
GBH 185-LI GBH 185-LI with GDE 12
1 609 92A 7WP | (28.03.2023)
English | 17
b)
GBH 185-LI
3 611 J24 0..
18
0–4675
1.9
0–1050
0–1050
SDS plus
50
22
13
20
(12 Ah)
296
208
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...