EuroLite SBM-32B Bedienungsanleitung Seite 16

2) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered to by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents to clean the device!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers. Should you need any spare parts, please use genuine parts.
The examination intervals for mobile electrical devices (German DGUV-V3) must be kept.
The operator has to make sure that the electrical devices are examined by an electrician before taking into
operation for the first time and after changes before taking into operation another time.
Electrical devices must only be taken into operation in a perfect condition and must be kept this way.
For keeping the perfect condition, electrical devices must repeatedly be approved in accordance with the
instructions given in the electro-technical guidelines.
A qualified electrician is responsible for the correct examinations.
Mobile electrical devices, extension cords with plugs, power cables with plugs and mobile cables with plugs
and permanent installation must be approved by an expert every three months.
Should you have further questions, please contact your dealer.
8. TECHNICAL SPECIFICATIONS
Power supply:
IP classification:
Protection class:
Power connection:
Cable length:
Power output:
Device fuse:
Protection:
Display type:
Display:
Housing design:
Dimensions:
Weight:
All information is subject to change without prior notice. © 03.03.2023
Eurolite is a brand of Steinigke Showtechnic GmbH
D00145638 Version 1.0 Publ. 03/03/2023
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
380-400V AC, 50Hz
IP20
Class I
Fixed power supply cord with CEE 32A 5-pin
1,2 m
6 x Safety contact (F), hinged lid mounting version fused
1 x CEE 32A 5-pol (F) recessed mounting
5 x 20 mm, F 3 A Fuse replaceable
1 x fault-current circuit breaker (FI) Typ B 63A/0,03A
6 x circuit breaker C 16A 1-pol
4 digits 7-segment LED display
Volts , amps , frequency
(19") 48.3 cm rack installation 3 U
Width: 48,3 cm
Depth: 28,0 cm
Height: 13,3 cm
6,8 kg
I
Andreas-Bauer-Str. 5
I
97297 Waldbüttelbrunn Germany
16/16 00145638, Version 1.0