nedis WCAM460GN Kurzanleitung Seite 9

If the microSD card indicator LED B
4
formatting failed. Try again or use a different microSD card.
The app interface (image D)
Product status
1
Settings menu
2
Photo folder tab
3
Video folder tab
4
Using the product
1. Switch the power button B
product.
The camera is ready for use if all indicator LEDs
4
B
1278
2. Open the Camera Trap Wireless app and login.
3. Select the product from the camera list.
4. To change the settings of the product:
• For iOS system: tap Options.
• For Android system: tap Setting.
5. Select the desired capture mode and adjust the settings as
desired.
Capture
mode
PIR delay
Time lapse
delay
PIR sensitivity
Timer
Photo
resolution
Burst number
Shutter speed Select the preferred shutter speed.
Video quality
Video length
Volume REC
Upload
frequency
q
are switched off.
Switch between photo, time lapse, video or
photo + video.
Set the interval between photos or videos.
Adjust the interval between photos or
videos when the product is in time lapse
mode.
Set the sensitivity of the motion sensor to
low, medium or high.
Switch the timer option on or off.
Set a specific time period in which the
camera takes pictures and videos every day.
Select the preferred photo resolution.
Select a photo burst amount, up to 9
photos.
Select the preferred video resolution.
5 to 180 seconds.
Select to mute or unmute the video
recordings.
Select the desired upload frequency of
photos and videos wirelessly on your
connected device.
9
lights up red, the
1
Reset to default button
5
Settings upload button
6
Setting menu tab
7
GPS location tab
8
to ON to switch on the