nedis WCAM460GN Kurzanleitung Seite 10

Time zone
Upload photo
resolution
Date and time Date format: dd/mm/yyyy - yyyy/mm/dd
Camera name
Information
bar
Cycle storage
Temperature
Latitude and
longitude
Format
microSD card
SWVER1
6. Tap the settings upload button D
the settings on the product.
LED indicator status
LED
Battery
SD Card
Signal
Server
Switching off the product
Switch the power button B
Select the time zone.
Select the desired photo upload resolution
wirelessly on your connected device.
- mm/dd/yyyy.
Time format: 24h / 12h
Enter a chosen name for the product.
Switch on to save photos with a date and
time watermark.
Switch on to allow the product the continue
storing photos and videos when the
microSD card is full by deleting the oldest
photos and videos.
Select the temperature format.
Insert the latitude and longitude manually
or tap "Use current location" to sync with
GPS.
Confirm to delete all data on the microSD
card.
Cancel, to go back.
Shows the installed firmware version.
Green
50 % - 100 %
OK
The 4G signal
is good.
The product
is connected
to the app.
1
in the app to modify
6
Blue
10 % - 49 %
The microSD
card is full.
The microSD
card is locked.
The 4G signal
is weak.
Connect the
product to
the app.
to OFF to switch off the product.
10
Red
0 % - 10 %
The microSD
card is
corrupted.
Insert the
microSD
card.
There is no 4G
signal.
The product
cannot
connect to
the app.