Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting up the product
1. Screw the antenna A
2. Release the latch A
3. Open the housing A
4. Insert a formatted microSD card in the microSD card
slot B
4
.
It is recommended to use a class 10 microSD card with a
4
minimum storage capacity of 256 GB.
5. Insert a SIM card in the SIM card slot B
To transmit images and videos and to manage settings
4
remotely, you need a SIM card with an active data
subscription (not included).
6. Close the housing A
7. Close the latch A
Powering the product (image C)
With batteries (not included):
1. Release the latch A
2. Open the housing A
3. Place the batteries.
Observe the plus (+) and minus (–) marks on the cell or
4
battery and product and ensure correct use.
Do not use rechargeable batteries.
4
4. Close the housing A
5. Close the latch A
With a solar panel (not included):
1. Hang the solar panel in a sunny location.
2. Connect the solar panel power output to the power A
Mounting the product
Mount the product using:
• The mounting strap A
• A tripod (not included) with any mount with a standardised
tripod screw attached to the tripod mount A
When using the product during night, the photos and
4
videos will be in black and white.
Formatting the microSD card
Formatting the microSD card will remove all files from the
4
microSD card. Make sure to back up all files you want to
keep before formatting the microSD card.
1. Switch the power button B
2. Press and hold the format button B
card indicator LED B
The SD card indicator LED B
formatting is successful.
to the antenna port A
q
w
.
.
4
.
4
w
.
w
.
4
.
.
4
.
w
.
y
q
to TEST.
blinks red.
1
lights up green when
1
8
7
.
.
3
r
.
9
until the microSD
.
5
Werbung
