Safety WarningS
• To prevent short circuits, this product should only be used inside and only in dry spaces.
Do not expose the components to rain or moisture. Do not use the product close to a bath,
swimming pool etc.
• Do not expose the components of your sytems to extremely high temperatures or bright light
sources.
• In case of improper usage or if you have altered and repaired the product yourself, all guarantees
expire. PureLink does not accept responsibility in the case of improper usage of the product or
when the product is used for purposes other than specified. PureLink does not accept
responsibility for additional damage other than covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
• Do not open the product: the device may contain live parts. The product should only be repaired
or serviced by a qualified expert.
• Only connect the adapter to the mains after checking whether the mains voltage is the same
as the values on the identification tags. Never connect an adapter or power cord when it is
damaged. In that case, contact your supplier.
1. introDuction
Congratulations on your purchase of the PureLink WHD030-V2! Replace your HDMI cable wirelessly
and locate your HDTV or projector wherever you want in the same room. No need to worry about the
location of your HD equipment. Perfect if you would rather not see cables running across the walls or
if you do not want to (or cannot) drill holes and lay cables.
Suitable for all HDMI equipment, such as Blu-ray®, HD set-top box or Laptop.
PureLink products are manufactured with the utmost precision and are top quality. Please read this
manual carefully and follow the instructions in order to get the very best from this product.
2. Package content
1x PureLink WHD030-V2 Transmitter (TX)
1x PureLink WHD030-V2 Receiver (RX)
2x Energy-saving switch mode power adapter
1x HDMI cable 1.5 m
1x Mini USB cable
1x Plugs + screws
1x User Manual
ENGLISH
-03-