Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.5
Basic information
Installation
Installing the Plug-on module PxtMX
Risk of damage!
The PxtRX or PxtFX unit on which the PxtMX is to be mounted
must be switched off (de-energised).
• The Plug-on module PxtMX is intended to be installed in an electrical cabinet.
• The Plug-on module PxtMX must be protected against the penetration of foreign
bodies due to the installation into the cabinet.
• The device is mounted directly on the mounting surface provided on the PxtFX or
PxtRX.
Fig. 10: Installation
Switch off the PxtRX or PxtFX device on which the PxtMX is to be mounted.
Loosen 2 screws
and remove the metal emblem
Place the PxtMX
so that the connector X4 engages in the socket
Screw the PxtMX in place using the fixing screws supplied.
Check that it is firmly seated.
4 Transport / Storage / Installation
.
Operating manual Plug-on module PxtMX
V1.0DE/EN
.
17
Werbung
