Comfast CF-WR755AC Benutzerhandbuch Seite 3

2. Repeater Mode Settings
2.1
The device is defaulted to Repeater Mode. (Do not connect the Ethernet port to the
router directly).
2.2 After the device is powered, connect the WiFi signal
COMFAST_XXXX_2G/COMFAST_XXXX_5G by mobile or connect the device with your
computer by cable.
2.3 Open your browser and input 192.168.10.1 to get to the login page. You will only
need to set a password on your first login. The
2.4 After setting the password, the device will begin to scan the available signals
automatically. (If you want to change the mode, please wait until scanning is finished
and click the home
input the router password to finish setting the repeating settings.
icon to set a mode). Choose the SSID you want to repeat, and
icon is for language selection.
3